|
General Description: THINNER is a mixture of esters, glycol, alcohol, aromatic solvents and ketones suitable diluents to all nitro products. It is manufactured for reducing lacquers before they are applied by different methods. Advantages: 1. Quickly reduces the consistency of the lacquer/paint to the required degree. 2. Improves film smoothness of lacquers/paint when applied either by spray or dipping thus extending excellent finish. 3. Lacquer/paint dries without blushing, resin blush, pinholing and other surface defects. 4. 4 . No “ orange peel†developed after the evaporation of . Thinner, and therefore increases the tensile strength of the film along with its gloss Characteristics: Appearance Colour Transparent Liquid. Specific Gravity ASTM D 3505 .85 + / - .02 Kg. / lit. Colour (Saybolt) ASTM D 1209 +30 Initial Boiling Point ASTM D 850 56. 2 Copper Corrosion ASTM D 849 none Non – Aromatics ASTM D 2360 50 – 60% Flash Point (Abel) IP 170 100C Properties: . THINNER has an average evaporation rate suggested for all Nitro Products when application is made in normal condition of temperature and humidity. . THINNER has a certain action preventing milky effect of the surface. Storage: Keep the container tightly closed. Shelf life is unlimited in close container. Keep away from direct sunlight and other sources of heat or ignition; do not smoke in storage areas. Packing: Available in 500 ml.1 lit , 20lit (Pail) and 200 lit (Drum) Physiological Hazards: THINNER contains highly flammable solvents. Harmful if inhaled and if absorbed through skin can cause irritation. Always use protective gloves and eye goggles when handling this product. It is highly recommended to provide proper ventilation on working area. Keep out of reach of children. If contact with skin or splash in eyes, wash with fresh water for a couple of minutes while removing contaminated clothing and shoes. If affected by inhalation of vapor, remove to fresh air. If swallowed, call a physician immediately. Do not induce vomiting
|
